1. Home
  2. Cycles Replacement Parts
  3. Schwinn Comfort Seat 1 ea CARD

Schwinn Comfort Seat 1 ea CARD

On This Page

 

Directions

Post Bracket Assembly: (See diagram) A - Post bracket. B - Center bolt. C1 & C2 - Inner rail brackets. D1 & D2 - Outer rail brackets. N1 & N2 - Nuts. Installation: 1. Check to see that nuts (N1 & N2) are hand tight. 2. Line the post bracket (A) up with the seat post (make sure the Post StopTab is facing the underside of the seat). Press the bracket onto the seat post until it stops. 3. Slide the seat forward and backward (seat rails slide inside rail brackets) to adjust the distance required to reach the handlebars. Note: The elbows should have a slight bend. 4. Tilt the seat by pulling up and/or pushing down on the front of the seat. 5. Tighten nuts (N1 & N2) with a wrench (adjustable or box). 6. Make sure all fasteners are tight before riding.

 

Description

Schwinn quality. Soft foam padding. Find Your Fit: Sport. Commute. Cruise. High-Density Foam Padding: Cushioned, comfortable riding. Soft Fabric Cover: Breathable, stretchable material keeps you cool and dry. Mid-Width Seat: Great for urban and commuter use. Includes: One bike seat. Tools required: 14 mm or adjustable wrench.

Other Description

Twitter. Facebook. Reduce, reuse, recycle, repeat.

Warnings

Not Applicable

UPC

038675146914