Morton Safe-T-Power Extreme Temperature Ice Melt



Directions for use: Wear gloves. Evenly sprinkle Morton® Safe-T- Power™ Calcium Chloride over an icy or snow packed surface (about 1/4-1/2 cup per square yard). Remove slush after melting has occurred. Storage: Seal container tightly and store in a dry area. Do not store where leaking of contents might cause damage.



Morton® Safe-T-Power™ Extreme Temperature Ice Melt. Pure calcium chloride. Salt free. Great for use in cold climates. Melts down to -25degrees F.

Other Description

Morton® Safe-T-Power™ is a high purity calcium chloride deicer that melts ice and snow at lower temperatures than salt and other deicers. Calcium chloride CAS #10043-52-4. 1-877-876-7258. Good Housekeeping Since 1909, limited warranty to consumers, replacement or refund if defective. ®registered trademark of Morton International, Inc. ©copyright 20010, Morton International, Inc.


First aid: In case of eye contact, immediately flush with large quantities of water. For skin contact, rinse thoroughly with water. Seek medical attention if either skin or eye irritation persists. If ingested, rinse mouth thoroughly with water. Large quantities may require medical attention. Keep out of reach of children.
All deicers can accelerate surface damage to concrete, since they increase the number of freeze-thaw cycles. Poor quality concrete is especially susceptible to deicer damage. Use this product only on properly formulated, cured, placed, air-entrained concrete. Do not use on concrete less than one year old or on brick or flagstone walkways having mortar joints. Do not take internally. Avoid contact with eyes, skin or clothing. Avoid breathing dust. Wash thoroughly after handling. This product can adversely affect leather shoes and gloves. This product must be used at the user's own risk of loss or damage from its use, storage or handling.