Command Brand Damage-Free Hanging Broom Gripper



Apply: 1. Clean surface with rubbing alcohol. Do not use household cleaners. 2. Separate strips. Remove red liners. Press adhesive to broom gripper. 3. Remove black liners. Press firmly to wall for 30 sec. Wait 1 hour before use. 4. Push broom in to hold. Pull broom out to release. Remove: 1. Hold broom gripper gently in place. 2. Never pull strip towards you! Always pull straight down. 3. Stretch strip slowly against wall at least 15 inches to release.



Command™ Brand Damage-Free Hanging Broom Gripper. New! Holds strongly. Removes cleanly. Holds up to 4 lb 1.8 kg. 3M. General purpose.

Other Description

Designed to hold mops and brooms with handle diameters of 0.8" to 1.0". Gripper can be reused with Command® large refill strips. Limited warranty and limitation of liability: (for product sold in USA): this product will be free from manufacturing defects. If defective, your exclusive remedy shall be, at 3M's option, product replacement or refund. 3M will not be liable for any loss or damage arising from this product, whether direct, indirect, special, incidental or consequential. Hook made in China. Strips made in U.S.A. 3M and Command are trademarks of 3M. 1-800-934-7355. Failure to follow instructions carefully may cause damage. Save instructions or visit ©2014, 3M All rights reserved.


Caution: do not hang over beds. Do not use on wallpaper. Do not hang valuable or irreplaceable items. Apply and use 50 degrees - 105 degrees F.


3M, Construction and Home Improvements Markets Division
3M Center, St. Paul, MN 55144