Scotch Super Glue Liquid Precision Applicator
On This Page
1) Clean surfaces and thoroughly dry. 2) Point tip away from face and body. 3) Do not squeeze dispenser buttons while puncturing. 4) To puncture turn nozzle and cap assembly down clockwise until fully seated and tight. 5) Remove cap by turning counterclockwise. 6) Apply adhesive lightly to one surface only. 7) Firmly press parts together. Hold until set. 8) Wipe off excess immediately with paper towel. 9) Wipe applicator tip with cloth or tissue after use. 10) Replace cap. Screw on tightly. 11) Store with tip up in a cool, dry place.
DescriptionScotch® Super Glue Liquid Precision Applicator. 60% less mess!* *Than metal-tube super glue liquids. Advanced formula. Patented droplet control technology. Bonds to: Wood. Metal. Plastic**. Ceramic and more! 3M.
Other DescriptionLess mess!* Stays fresh! Scotch* Super Glue Liquid in Precision Applicator features patented droplet control technology for the ultimate in precision dispensing. The clog resistant "stay fresh" bottle avoids dry-out, so you can use the bottle over and over again. Use on wood, metal, ceramic, leather, rubber, vinyl, plastic** and more. *Than metal-tube super glue liquids. **Not suitable for polystyrene foam, foam rubber, polyethylene and polypropylene. Keep back card for product directions. Conforms to ASTM D-4236. 3M, Scotch and the Plaid Designplaid design are trademarks of 3M. All rights reserved. For additional health and safety information, see material safety data sheet (28-8361-9) or call, 1-800-3M-HELPS or 1-651-737-6501. www.scotchbrand.com. ©2012, 3M.
WarningsDanger! Combustible. Bonds instantly.
Danger! Combustible. Bonds skin and eyes instantly. Causes eye and skin irritation.
Read carefully other cautions on the back panel.
May cause allergic skin reaction. May cause nose and throat irritation. Skin contact through clothing may cause burns.
Contains: ethyl cyanoacrylate, hydroquinone.
Precautions: keep away from heat and flame. Avoid eye and skin contact. Do not get on skin or clothing. Avoid breathing of vapors. Use only with adequate ventilation. Do not swallow. Wash thoroughly after handling. Avoid excessive use of force to free bonded area. Close container after each use.
Keep out of reach of children.
Suggested first aid:
Eye contact: do not force eyelids open. Immediately flush eyes with large amounts of water for at least 15 minutes. Get immediate medical attention.
Skin contact: wash affected area with soap and water. If signs/symptoms develop, get medical attention.
For skin bonds: quickly soak in warm water and avoid use of excessive force to free bonded area. If unable to free bonded area, or if lips or mouth are bonded, get medical attention. If irritation persists, get medical attention. If spilled on clothing, immediately flush with large quantities of water. Do not remove bonded clothing; contact a physician.
Inhalation: remove person to fresh air. If signs/symptoms develop, get medical attention.
If swallowed: do not induce vomiting. Get medical attention.