Elmer's All Purpose Glue-All Max Super Strength Formula
On This Page
Application: Surface must be clean, curing requires moisture. Porous/semi-porous surfaces: Dampen both surfaces about 1 minute before gluing. Non-porous: dampen one side, apply glue to the other before bonding. Clamping required 1-4hrs, allow 24hrs. before using/coating. Cure time varies, glue expands as it cures. Sand cured glue before staining. Do not use below 40 degrees F/above 90 degrees F. Not for continuous submersion / below water line. Clean up: Wet glue: Use acetone or mineral spirits. Cured glue: Sand or scrape.
DescriptionElmer's® All-Purpose Glue-All® Max Super Strength Formula! Bonds metal, stone, wood & more. Waterproof. Sandable & paintable. Low foaming, less mess. Interior/exterior.
Other DescriptionACMI, CL®. Arts & Creative Materials Institute certified. Conforms to ASTM D4236. Non-toxic. www.elmer's.com. ©2011 Elmer's Products, Inc.
WarningsExposure may cause acute or delayed damage to the lungs.
Eye/skin irritant. Inhalation of aerosol may result in respiratory allergies. Skin contact may cause allergic skin rashes. Contains diisocyanates.
Precautions: Avoid prolonged contact with skin. Do not spray apply. Wash hands immediately after use. Use rubber gloves to avoid skin staining/irritation. Keep away from eyes. Keep out of reach of children. Keep out of reach of animals.
First aid: If eye contact occurs, rinse with tap water for 5-10 min. If irritation persists, seek medical care. If skin contact occurs, wash with soap and tap water for 5min.
For more information, contact a Poison Control Center or call toll-free 1-888-516-2502.
DistributorElmer's Products Inc
460 Polaris PKWY, Westerville, OH 43082