Philips Plug and Play T8/T12 48 Inch LED Tubes
2 tubes
On This Page
Directions
1. Switch-off power. 2. Remove the existing fluorescent lamp. 3. Select desired color temperature via switch before installing the lamp. 4. Install the Philips LED T8 lamp. 5. Switch on power.
Product Details
48 inch. 1212.3 mm length. Selectable CCT. Multi color use. 3000k bright white; 3500k neutral white; 4000k cool white; 5000k daylight; 6500k daylight deluxe. 1800 lumens 16*. Replaces F32T8 or F40T12 fluorescent tubes. Replaces all T8 & T12 fluorescent tubes. 36,000* hours. Mercury free. Plug and Play (Type A): Our most compatible lamp for magnetic or electronic ballasts. EyeComfort(a): Designed to reduce flicker, strobe or glare. Saves energy. Lasts 36,000 hours**. Medium bi-pin base. Instant on. * When operated in strip fixtures with electronic ballasts, this 16 Watt, 1800 lumens, 3000/3500/4000/5000/6500K LED T8/T12 TLED provides equivalent foot candles (useful light) as a 32 Watt, 3000/3500/4000/5000/6500K fluorescent T8/T12. Actual light output may vary due to fixtures, applications, and/or ballasts. Use of this TLED on typical magnetic ballasts might create higher foot-candles, and consume more power. ** Lasts 36,000 hours, average life based on engineering testing and probability analysis where the lamp is used on average 3 hours/days, 7 days/week, with an electronic ballast having 0.88 ballast factor. (a) See other panel(s) for details. 5 Years Limited Warranty. Limited Warranty: Signify warrants that this lamp will be free from defects in material and workmanship and will operate for 5 years based on up to 3 hours average usage per day/7 days per week, when used as directed. If this lamp does not conform to the warranty, Signify will send you, at its election, a replacement lamp or refund your original purchase price upon receipt of the returned lamp, register receipt and proof of purchase. Please call our toll-free number, write to Signify or send an email at the website listed on this package to find out how to return the lamp. This limited warranty does not cover lamps subject to accident, neglect, abuse, misuse or acts of God. Replacement or refund is your sole remedy. Except to the extent prohibited by applicable law, any implied warranties are limited in duration to the duration of this warranty. Liability for incidental or consequential damages is hereby expressly excluded. Some states do not allow exclusion of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Please visit www.philips.com/instantfit for the most current ballast compatibility list. UL listed. www.philips.com/lighting. www.signify.com/ClimateAction. Questions or Comments: 1-800-555-0050. www.philips.com/lighting. Visit www.philips.com/eyecomfort for flicker, strobe and other EyeComfort criteria and product details.Nutrition Facts
Warnings
Warnings And Cautions: Caution risk of fire - If the lamp or luminaire exhibits undesirable operation (buzzing, flickering, etc.), immediately turn off power, remove lamp from luminaire and contact manufacturer. These devices are not intended for use with emergency exit fixtures or emergency exit lights. This product may cause interference to radio equipment and should not be installed near maritime safety communications equipment or other critical navigation or communication equipment operating between 0.45 - 30Mhz. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Caution risk of fire - Perform a visual inspection to ensure lampholders are not damaged or loose (a) Caution Risk Of Fire - Do not install this lamp in a pre-heat luminaire. If lamp does not light when the luminaire is energized, remove lamp from luminaire and contact lamp manufacturer or qualified electrician. Only install in operating environments between -4 degrees F And +113 degrees F (-20 degrees C And +45 degrees C). Type A Lamp - Intended for direct substitution of a fluorescent lamp and operating from the integral ballast without any modifications to the fluorescent luminaire, Notes: This device complies with Part 18 of the FCC Rules. This Class B digital device complies with Canadian CAN ICES-005(B)/NMB-005(B). Please visit www.philips.com/fcc for more information.Manufacturer
Signify North America Corporation
400 Crossing Blvd Suite 600 Bridgewater, NY 08807 United States
UPC
00046677586058