Mag 1 DOT 3 & DOT 4 Brake Fluid
12 fl oz (354 ml)
On This Page
Directions
Special formulation exceeds high standards of performance and safety for a DOT 3 or DOT 4 fluid. For all disc drum brake systems, including ABS, in which a DOT 3 or DOT 4 fluid is recommended. Complies with federal motor vehicle safety standard 116. For DOT 3 and DOT 4 motor vehicle brake fluid. Also meets SAE j1703 and j1704 specs. Minimum wet boiling point: 311 degrees f (155 degrees c). 1. Follow vehicle manufacturer's recommendations when adding brake fluid. 2. Keep brake fluid clean and dry. Contamination with dirt, water, petroleum products or other materials may result in brake failure or costly repairs. 3. Store brake fluid only in its original container. Keep container clean and tightly closed to prevent absorption of moisture. 4. Caution: do not refill container, and do not use for other liquids, Directions: Clean all dirt from around cover on master cylinder before removing. Fill unit to level specified by manufacturer. Replace cover. Check fluid level once a month. To bleed system, refer to service manual. Do not reuse brake fluid from bleeding operation.
Product Details
DOT 3 & DOT 4. Motor vehicle brake fluid. Friction. Management for xtreme protection. mag1.com. 800.566.2789. Manufactured in U.S.A. with foreign and domestic components.Nutrition Facts
Warnings
Warning: Skin and eye irritant, harmful if swallowed. Read cautions on back panel. Warning: Contains polyalkylene glycol ethers. If swallowed, call a physician immediately. Avoid eye and skin contact. In case of skin or eye contact, flush with water for 15 minutes. Keep out of reach of children. Never wash cylinders or parts with gasoline, kerosene or oil. Avoid spilling fluid on car finish or brake lining.Manufacturer
Highline Warren LLC
8700 Trail Lake Drive West Suite 300 Memphis, TN 38125
UPC
00071621704899