Elmer's Super Fast Epoxy Cement
On This Page
Application: surfaces should be clean, dry and free of dirt and oil. 1. Remove tabs and squeeze an even amount of resin and hardener onto a clean mixing surface. 2. After mixing thoroughly, apply epoxy to the surface to be glued and hold pieces together firmly for 5-10 minutes. Apply cement to one of the surfaces to be glued. 3. Allow 12-24 hours for full cure. Retain this card for the life of the product.
DescriptionElmer's® Super Fast Epoxy Cement. Fast curing, rigid, strong bond. Adheres to plastic, metal + wood. No shrink. Indoor/outdoor. Solvent free - no VOCs. Set time 5 min. Cure time 1 hr. Dries amber, non-flammable. 1fl oz 29.5ml.
Other DescriptionUses: a fast, rigid bond for plastics, wood or metal. Reorder E1009. 1-888-516-2502. www.elmers.com. ©2006 Elmer's Products, Inc.
IngredientsContains: Tri (Dimethylaminoethyl) Phenol Tris (Dimethylaminoethl) Phenol, Epoxy Resin.
WarningsWarning: may be harmful by ingestion or by skin contact, or if swallowed. Eye or skin irritant. Exposure may cause allergic reactions. See back panel.
Precautions: avoid skin contact, and ingestion. Wash hands immediately after use. When using wear impermeable protective gloves. Keep away from eyes.
Keep out of reach of children.
First aid treatment: if eye contact occurs, rinse with tap water for 5-10 minutes. If irritation persists, seek medical care. If skin contact occurs, wash with soap and water for 5 minutes. If swallowed, get prompt medical attention.
For further health information contact a Poison Control Center or call toll free 1-888-516-2502.
DistributorElmer's Products, Inc
Columbus, OH 43219