Scotch Fasteners General Purpose White
On This Page
Directions: 1. Make sure all surfaces are clean and dry. 2. Use 1 inch of product for every 1 pound. Do not remove protective liner yet. 3. Align and connect one piece of hook material to one piece of loop material. 4. Remove liner on one side and apply fastener to item - press firmly on liner for good adhesive contact. 5. Remove liner on second side and apply item to mounting surface - press firmly on item for good adhesive contact.
DescriptionScotch® General Purpose White Fasteners. Now 2X stronger on plastic surfaces. Cont. 2 sets of strips. 1 in/pulg x 3 in/pulg (25,4 mm x 76,2 mm) EA. 3M.
Other DescriptionFor indoor and outdoor use. Works on most surfaces that are clean, dry and sealed with paint or varnish, including drywall, wood, brick, metal, concrete, bare glass and many plastics. Each inch of product holds up to 1 lb. Lasts for thousands of closures. Do not hold objects over 2 lbs. 3M, Scotch and the Plaid design are trademarks of 3M. Questions or comments? Call toll-free 1-800-3M-HELPS. 1-800-494-3552. www.3m.com. ©2011, 3M. All rights reserved.
WarningsNote: this is a permanent adhesive and may cause damage if removed. Not recommended for use on wallpaper and other delicate surfaces. Do not use in spaces where injury might occur if mounted object fell.
Distributor3M Construction and Home Improvement Markets Division
3M Center, St. Paul, MN 55144-1000