WD-40 Specialist Rust Release Penetrant Spray
On This Page
Directions
Directions: Shake can well. Flip straw up for pinpoint stream or down for wide angle spray. Saturate the surface to be loosened and let soak for several minutes. Re-apply if necessary.
Description
WD-40® Specialist™ Rust Release Penetrant Spray. With Blu Torch™ technology. Frees corroded nuts & bolts. Penetrates rust. Fast-acting.Other Description
You have a job to do. WD-40 specialist line helps you get it done! Blu Torch™ technology is a proprietary blend of ingredients that breaks the bonds of the toughest stuck bolts. Reach for WD-40 specialist rust release penetrant first to get it off fast. Works fast to free rusted bolts and other stuck parts. The capillary action penetrates into tight crevices, threads, and seams to break the bonds that hold stuck parts together. Helps prevent rust and corrosion from re-forming and leaves behind a lubricating layer. Ideal for use on: nuts, bolts, pipe threads, locks, chains and rusted things that are stuck and won't move! Safe to use on plastics, rubber, and metal. Steel®. Please recycle when empty. No CFCs. WD-40 safety hotline 1-888-324-7596. wd40specialist.com. Propellant: Co2.Warnings
Danger: flammable. Harmful or fatal if swallowed.Contents under pressure. Eye and skin irritant.
Keep out of reach of children. Read carefully other cautionary information on back panel.
Danger:
Contents are flammable. Keep away from heat, sparks, pilot lights, hot surfaces and open flames. Unplug electrical tools, motors and appliances before spraying or bringing the can near any source of electricity.
Electricity can burn a hole in the can and cause contents to burst into flames. To avoid serious burn injury, do not let the can touch battery terminals, electrical connections on motors or appliances or any other source of electricity.
Contents under pressure: do not puncture or incinerate (burn) container, even when empty. Do not expose to heat or store above 120 degrees F. Avoid eye contact. Avoid prolonged or repeated contact with skin and clothing. Avoid breathing vapors or spray mists. Use in well ventilated area. Wash thoroughly with soap and water after use. Intentional inhalation abuse (concentrating and inhaling vapors) may be harmful or fatal. Keep out of reach of children.
First aid: contain petroleum distillates and carbon dioxide propellant.
Ingestion (swallowed): do not induce vomiting unless directed to do so by medical personnel. Call physician, Poison Control Center or the WD-40 safety hotline at 1-888-324-7596 immediately.
Eye contact: flush thoroughly with water for 15 minutes. Get medical attention if irritation persists.
Skin contact: wash with soap and water. If irritation persists, get medical attention.
Inhalation (breathing): if irritation develops, discontinue use and move to fresh air. Get medical attention if irritation or other symptoms persist.
UPC
00079567300007