1. Home
  2. Sealants
  3. Flex Shot Sealant 8 oz CAN

Flex Shot Sealant 8 oz CAN

On This Page

 

Directions

Directions for Use: (1) All surfaces must be clean, dry and free from dirt, grease and oil. (2) Hold can at 45 degree angle, push against the nozzle side and apply into the joint of seam to obtain full contact between surfaces. (3) Flex Shot can be smoothed within 5 minutes of application. Remove express immediately with a dry paper towel. (4) sealant form a tack free skin in 20 minutes. Length of dry time depends upon temperature and humidity usually cure within 24 to 48 hours. (5) After using, extend a small amount of material beyond the end of the nozzle. This will cure and form a seal for the remaining material. Pull out this curd plug when you are ready to use again.

 

Description

The easy way to caulk, bond & seal. As seen on TV. Mildew resistant. Easy to use! Leak proof seal! Strong bond! Excellent for: Kitchens & baths sinks & showers tubs & tiles windows & skylights roofs & gutters autos & boats RV’s & campers PVC pipes duct work. No caulking gun needed! Flex shot is a thick, rubberized paste that fills cracks and holes. If dries to a tough, flexible, watertight seal. Flax Shot seals out water, air and moisture. Flex Shot comes with an easy to use nozzle that gives you a perfect bead every time. No need for a caulking gum! Flex Shot is the easy way to caulk, bond & seal virtually everything.

Other Description

Costumer service: 877-370-0632, to order more flex shot: 877-857-5792. No CFCs.

Ingredients

Contains: Dimethylsiloxane (CAS 70131-67-8), Silica (CAS No. 7631-86-9), Methyltriacetoxysilane (CAS No.4253-34-3), Ethyltriacetoxysilane (CAS No.17689-77-9), Petroleum Distillates(CAS No. 64742-46-7), Diflouroethane (CAS No. 75-37-6).

Warnings

Not Applicable

Distributor

Swift Response
877-370-0632

UPC

00855647003385