Elmer's All-Purpose Glue-All Max
On This Page
Directions
Application: surfaces must be clean, curing requires moisture. Porous/semi-porous surfaces: dampen both surfaces about one minute before gluing. Apply glue to one side and combine. Non-porous: dampen one side, apply glue to the other and combine. Clamping required 1-4 hrs; allow 24 hrs before using/coating. Cure time varies, glue expands as it cures. Sand cured glue before staining. Do not use below 40 degrees F /above 90 degrees F. Not for continuous submersion/below water line. Clean up: wet glue: use acetone or mineral spirits. Cured glue: sand or scrape. Storage: wipe tip with clean dry cloth after use and securely screw cap over the tip. Store between 40 degrees F and 90 degrees F.
Description
Elmer's® All-Purpose Glue-All® Max. Super strength formula! Bonds metal, stone, wood & more. Waterproof. Sandable & paintable. Low foaming, less mess. Interior/exterior. 0.5 fl oz [14.7ml].Other Description
www.elmer's.com. ©2011 Elmer's Products, Inc.Warnings
Warning: vapor harmful. Eye and skin irritant. See back panel.Warning: vapor harmful. Eye and skin irritant. Inhalation of aerosol may result in respiratory allergies. Skin contact may cause allergic skin rashes. Contains: diisocyanates.
Precautions: avoid prolonged contact with skin. Do not spray apply. Wash hands immediately after use. Use rubber gloves to avoid skin staining/irritation. Keep away from eyes. Keep out of reach of children. Keep out of reach of animals. First aid: if eye contact occurs, rinse with tap water for 5-10 min. If irritation persists, seek medical care. If skin contact occurs, wash with soap and water for 5 min. For more health information, contact a Poison Control Center or call toll-free 1-888-516-2502.
Distributor
Elmer's Products, Inc460 Polaris Parkway, Westerville, OH 43082
www.elmer's.com
UPC
00026000394185