Schwinn Tube 1 ea BOX
On This Page
Adult assembly required. Installation: 1. Match tube size and tire size (see tire sidewall). 2, Remove wheel from bicycle. Deflate tire completely. 3. Opposite the valve, use a bicycle tire lever to pry the tire bead up and out of the rim. Repeat around the wheel until one bead is off the rim. 5. Remove tube. Release second tire bead. Remove tire. 6. Carefully inspect inside of the rim and tire for the cause of the flat. 7. Inflate the tube 1/4 full and place inside tire. 8. Insert the valve stem through valve stem hole in rim. 9. Start at the valve stem and install the first bead onto the rim. Repeat for the second bead. 10. Slowly inflate the tire, checking the tire is seated properly and not pinched as the tire is inflated. 11. Inflate to recommended pressure (see tire sidewall).
DescriptionIncludes: One bicycle tube. Est. 1895. Helps eliminate flats. Fits 24 inch x 1.75 inch - 2.125 inch tires standard schrader valve stem. Peace of mind. Self-sealing gel seals small holes. Features: Helps Eliminate Flats: internal gel seeks out and seals small punctures. Standard Schrader Valve: For easy inflation. Fits Most 24 inch Bicycle tires: Fits tire sizes 24 inch x 1.75 inch - 2.125 inch.
Other DescriptionFollow ride Schwinn on: Twitter. Facebook. For the Sake of Our Planet: please reduce, reuse, recycle, repeat.
WarningsThis product may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm.