Schwinn Tire Tube 1 ea BOX
On This Page
Directions
Installation: 1. Match tube size and tire size (see tire sidewall). 2. Remove wheel from bicycle. Deflate tire completely. 3. Squeeze the tire beads into the center to the rim. 4. Opposite the valve, use a tire lever to pry the tire bead up and out of the rim. Repeat around the wheel until one bead is off the rim. 5. Remove tube. Release second tire bead. Remove tire. 6. Carefully inspect inside of rim and tire for the cause of the flat. 7. Inflate the tube 1/4 full and place inside tire. 8. Insert the valve stem through valve stem hole in rim. 9. Start at the valve stem and install the first bead onto the rim. Repeat for the second bead. 10. Slowly inflate the tire, checking the tire is seated properly and not pinched as the tire inflated. 11. Inflate to recommended pressure (see tire sidewall).
Description
Includes: One bicycle tube. Fits 12 inches x 1.75 inches - 2.125 inches tires. Standard schrader valve stem. Fits schrader valve. Standard Schrader Valve Stem: For easy inflation. Fits Most 12 Inches Bicycles Tires: Fits tire sizes 12 inches x 1.75 inches - 2.125.Other Description
Twitter. Facebook.Warnings
Do not overinflate tubes. Fill tube with floor or hand pump only. Do not use compressors which can damage the tube. To avoid damage to tires and tubes do not use a screwdriver or other sharp instruments to amount bike tires. Check tires for proper inflation prior to ride for safety and to ensure maximum tire life.UPC
038675582705