Schwinn Tire Tube 1 ea BOX



Installation: 1. Match tube size and tire size (see tire sidewall). 2. Remove wheel from bicycle. Deflate tire completely. 3. Squeeze the tire beads into the center of the rim. 4. Opposite the valve, use a tire lever to pry the tire bead up and out of the rim. Repeat around the wheel until one bead is off the rim. 5. Remove tube. Release second tire bead. Remove tire. 6. Carefully inspect inside of rim and tire for the cause of the flat. 7. Inflate the tube 1/4 full and place inside tire. 8. Insert the valve stem through valve stem hole in rim. 9. Start at the valve stem and install the first bead onto the rim. Repeat for the second head. 10. Slowly inflate the tire, checking the tire is sealed properly and not pinched as the tire is inflated. 11. Inflate to recommended pressure (see tire sidewall).



Fits Most 27.5 inch Bicycle Tires: Fits tire sizes 27.5 inch x 1.75 inch - 2.125 inch. Includes: One bicycle tube. Fits schrader valve. Peace of Mind: Self-sealing gel seals small holes. Helps Eliminate Flats: Internal gel seeks out and seals small punctures. Standard Schrader Valve: For easy inflation.

Other Description

Twitter. Facebook.


This product may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm.