WD-40 Specialist Water Resistant Silicone Lubricant


 

Directions

Safe to use on all metal and non-metal surfaces including rubber, plastic, and vinyl. Dries fast and leaves a clear, non-staining film without stickiness or messy residue. Safe for temperature ranges between -100 degrees F to 500 degrees F. Directions: Shake can well. Flip straw up for pinpoint stream or down for wide angle spray. Apply by spraying directly on surface to be lubricated and protected. Dries in seconds.

 

Description

WD-40® Specialist™ Water Resistant Silicone Lubricant. Multi-surface. Quick-drying. Protects against rust.

Other Description

You have a job to do. WD-40 Specialist line helps you get it done! Lubricates, waterproofs, and protects. Dries quickly and won't attract dirt. Ideal for use on: cables, pulleys, guide rails, valves, linkages, hinges, locks, and more. Steel. Please recycle when empty. No CFCs. WD-40 safety hotline 1-888-324-7596. wd40specialist.com.

Warnings

Danger: extremely flammable. Harmful or fatal if swallowed. Contents under pressure. Eye and skin irritant.
Keep out of reach of children. Read carefully other cautionary information on back panel.
Danger:
Contents are extremely flammable. Keep away from heat, sparks, pilot lights, hot surfaces and open flames. Unplug electrical tools, motors and appliances before spraying or bringing the can near any source of electricity. Electricity can burn a hole in the can and cause contents to burst into flames. To avoid serious burn injury, do not let the can touch battery terminals, electrical connections on motors or appliances or any other source of electricity. Contents under pressure: do not puncture or incinerate (burn) container, even when empty. Do not expose to heat or store above 120 degrees F. Avoid eye contact. Avoid prolonged or repeated contact with skin and clothing. Avoid breathing vapors or spray mists. Use in well ventilated area. Wash thoroughly with soap and water after use. Intentional inhalation abuse (concentrating and inhaling vapors) may be harmful or fatal. Keep out of reach of children.
First aid: contains petroleum distillates and propane/n-butane propellant.
Ingestion (swallowed): do not induce vomiting unless directed to do so by medical personnel. Call physician, poison control center or the WD-40 safety hotline at 1-888-324-7596 immediately.
Eye contact: flush thoroughly with water for 15 minutes. Get medical attention if irritation persists.
Skin contact: wash with soap and water. If irritation persists, get medical attention.
Inhalation (breathing): if irritation develops, discontinue use and move to fresh air. Get medical attention if irritation or other symptoms persist.

UPC

00079567300014