Bell Frame Pump 1 ea CARD
On This Page
Directions
Schrader: Telescoping Barrel: Telescoping, 2-stage barrel design expands in use to push 35% more air per stroke than similar size pump. Pump is pre-set for Schrader valves. With lever in up position, press pump head onto valve at 90 degrees angle. Push lever down to lock before pumping. Pull handle to open position and begin inflation. Push lever up to release. Presta: To inflate Presta valve tubes, turn cap counter clockwise to remove. Pull out and reverse the two-piece adaptor so that the smaller hole is facing out. Reattach pump head cap, screwing clockwise. With Presta valve on tube opened and lever in up position, press pump head onto valve at 90 degrees angle. Push lever down to lock before pumping. Pull lever up to release. Lock for high pressure (Easier pumping). Unlock for high volume (More air). To inflate with more volume twist tube to unlock telescoping barrel. To inflate with more pressure lock telescoping barrel in place.
Description
Schrader and presta valves. T-handle. Gauge. Dual Settings: For easy or fast inflation. 78 cu cm high volume. 27 cu cm high pressure. 120 psi max. Telescoping barrel pushes more air. Includes: One (1) pump, and mounting bracket.Other Description
For more information about bike pumps, go to: www.thebellgarage.com.Warnings
Caution: Do not over inflate! Always follow recommended air pressure as indicated on tire sidewall or item you are inflating. Warning: Before every ride, make sure bracket and pump are securely and do not interfere with safe operation of bicycle (Braking, steering, pedaling, etc). Periodically check air pressure to avoid damage.UPC
035011971315