Bell Headlight 1 ea BLISTER PACK
On This Page
Directions
Headlight: To install headlight: Place on handlebar. Wrap silicone strap around bar as tightly as possible. Latch to hook. To recharge light: Remove light from bicycle. Plug small side of included usb cable into back of light and the large end into your computer or any other powered USB outlet. The indicator light will flash red while charging and change to green when charging is completed. Charge completely before first use. Tail light bracket. Tail Light: To install tail light: Place mount on seatpost at desired position. Wrap silicon strap on seatpost and hook in place. Putting your tail light in the bracket. Clip fixation clip. Tail light: Align clip on tail light with slot in bracket and slide into place until it clicks. To release: Pull clip gently away from the light and side upwards until clear. Batteries. To install batteries: On the bottom of the light there is a slot. Use a small coin to pop the lens off, exposing the battery housing. Tail light uses 2-AA batteries included.
Description
Small but powerful headlight focused beam to see the road 2 modes: steady/strobe. Be safe and be seen. Beam distance 82 feet. Brightness 50 lumens. Runtime Steady/ Stroke 22/83 hrs. Brightness: The higher the lumen count, the brighter the beam. Beam Length: lets you see farther down the road. Run Time: Vital to know so you don’t get caught in the dark! Bell’s advance optic technology puts the light where it’s neededWarnings
Not ApplicableUPC
035011975597