1. Home
  2. Cycles Replacement Parts
  3. Bell Inner Tube 1 ea BOX

Bell Inner Tube 1 ea BOX

On This Page

 

Directions

How To Replace Tube: Requires two tire levers. 1. Remove wheel from bike; use thin end of tire lever to pry tire from rim; insert 2nd lever 3 spokes away. Move levers in opposite direction. 2. Reach in between the rim and tire and remove tube; check inside of tire for sharp objects and remove them. 3. Slightly inflate tube, just enough to give it some shape; insert new tube valve hole in wheel. 4. Use hand to reset tire back on wheel; pry last part of tire onto rim with tire levers if needed. Be careful not to pinch the tube between the tire and rim! 5. Inflate tire about half way then check to make sure it is correctly seated all the way around the rim; inflate to recommended PSI on tire sidewall.

 

Description

27.5 inch (48.26 mm - 53.98 mm). Includes: one tube. The original. Standard valve.

Warnings

Not Applicable

UPC

035011948980