1. Home
  2. Lawn/Garden Power Tools Replacement Parts/Accessories
  3. Black + Decker Edger Blade 1 ea BLISTER PACK

Black + Decker Edger Blade 1 ea BLISTER PACK

On This Page

 

Directions

Instructions for Edger Blade Replacement: To remove the blade and attach new blade (see Figure 1): 1. Wait for the blade to come to a complete stop and unplug tool. 2. Use 1 in. wrench on outer washer to hold the blade from turning. Loosen hex nut. 3. Replace blade and washers with new supplied blade and washers. 4. Place washer on shaft- flats in washer hole must engage with flats on shaft. 5. Place blade on shaft. 6. Place second washer on shaft over blade, align flats in washer with flats on shaft. 7. Install hex nut and tighten securely (about 1/2 turn, 140 in.-lbs.)

 

Description

Fits: LE750. EH1000. Serrated Edges for aggressive cut. Hardened steel for long life. This blade has wear indicators (Fig. 2). When blade wears to the small hole at each end of the blade it will give approx. 3/8 in (9.5 mm) depth of cut and should be replaced.

Warnings

Not Applicable

UPC

00028877306308