Kwikset Door Latch 1 ea BLISTER PACK
On This Page
Directions
1. Remove existing lockset & latch from door, loosen set screw and remove lever, 2. Measure the backset of your door, 2-3/8 inches or 2-3/4 inches 60 mm or 70 mm. 3. For a 2-3/4 inches (70 mm) backset, move the spring pin to the 2-3/4 inches salt. 4. Select the latch option you desire & prepare as shown. Options, a. Insert latch into the back plate. B. Position desired faceplate over latch bolt & snap it onto the back plate. C. Install the latch assembly into a 1 inches or 7/8 inches diameter hole, making sure that the slant of bolt faces in the direction that the door closes. This option requires a 1 inches (25 mm) diameter hole. A. Slide collar onto latch, allowing catch pins (a) to snap into the notches (b) of collar. B. Install the latch into a 1 inches diameter hole with the slant of bolt facing in the direction that the door closes.
Description
No. 1 selling US lock brand (Source: TraQline US quarterly brand unit share report, Q4 2006 through Q4 2015). Trusted security since 1946.Other Description
Kwikset is ready to assist you. 1.800-327-5625.Warnings
Not ApplicableUPC
00042049335583