Loctite Epoxy Instant Mix Translucent Yellow
On This Page
Directions: surface preparation - protect work area. Surfaces should be clean, dry and free of grease and oil. Roughen smooth surfaces for better adhesion. To open and dispense: 1. Hold syringe with nozzle end up and pull back slightly on plunger, allowing air bubbles to rise to top. 2. Snap cap off by pushing to the side. Do not twist. 3. Attach nozzle over syringe opening, push past prongs, and turn 90 degrees to lock in place. 4. Depress plunger to dispense epoxy directly onto one side of the surfaces to be bonded. Bonding - join surfaces within 4 minutes of adhesive application. Immediately remove excess glue with mineral spirits or rubbing alcohol (follow the solvent manufacturer's instructions). The bond sets in 5-7 min. and achieves usable strength in 20 min. Closure - remove and discard nozzle. Retract plunger slightly and wipe syringe tip. Remove cap from side holder and place on end of syringe. Technical data: Leave undisturbed for - 20 minutes. Full strength - 24 hours, 3200 PSI on steel. Cured form - translucent yellow solid. Application - 39 degrees F (4 degrees C) to 95 degrees F (35 degrees C). Withstands - -10 degrees F (-23 degrees C) to 120 degrees F (49 degrees C). Not recommended for -PE, PP, non-stick coatings, nylon products, flexible materials, prolonged immersion in water or potable water systems.
DescriptionLoctite® Epoxy Instant Mix™. Self mixing & precise application. Setting 5min time. Translucent yellow. 3200 PSI. Metal, wood, ceramic, stone, glass, tile & most plastics. Henkel. 0.47 fl oz (14ml).
Other DescriptionA high-strength 2-part adhesive in an easy to use applicator. Final bond is high strength and weather, water and solvent resistant. Fills voids and bonds uneven surfaces. Henkel. ©Henkel Corporation 2010. 1-800-624-7767 9:00 AM - 4:00PM Est Monday-Friday. www.loctiteproducts.com.
WarningsDanger: corrosive. Causes eye and skin burns. May cause allergic skin and respiratory reaction. May be harmful if absorbed through skin. Read carefully other cautions on back panel.
Danger: contains epoxy resin, polymercaptan and amine curing agents. Do not get in eyes or on skin. Do not breathe vapors. First aid: for eye contact, flush with water for 15 minutes, call a physician. For skin contact, wash thoroughly with soap and water, call a physician if symptoms persist. If swallowed, do not induce vomiting, call a physician. Keep out of the reach of children.