Permatex Rear Window Defogger
0.02 fl oz (0.6 ml)
On This Page
Directions
1. Ensure rear defogger unit is turned off. Carefully remove wire from tab. 2. Ensure tab is flat and makes complete contact with mounting surface. 3. Open Cleaner/Activator Towelette by pulling both sides of protective packet at the point at the top of package. Fold packet back to use. Towelette is attached to packet, do not remove. 4. Apply activator to lead attachment area on window and tab. Allow activator to dry for 5 minutes. Do not touch mounting surface of glass or tab. 5. Thoroughly knead the adhesive pouch until the adhesive is of uniform beige color. If pouch is not kneaded fully, you will not get the intended results. Cut top of pouch. Apply one drop of adhesive to center of mounting area. 6. Immediately apply tab to rear window; hold firmly in place for 1 minute. Allow 24 hours to cure before re-attaching wire or activating defogger. Note: Do not mount tab on the same grid area if the grid has been removed from the glass. There must be grid so that a complete circuit can be made. Precautionary Statements – Storage: Store in a well-ventilated place. Keep cool. Store locked up. Precautionary Statements – Disposal: Dispose of contents/container to an approved waste disposal plant.
Product Details
Electrically conductive tab adhesive. Permanently bonds defogger tabs. Resistant to extreme weather conditions. www.permatex.com. Toll Free: 866-732-9502. Assembled in U.S.A. with U.S. and global materials.Nutrition Facts
Warnings
Precautionary Statements - Prevention: Contains: Acrylic acid, Aluminum silicate, Dimethylbenzyl hydroperoxide, Glass, 2-hydroxyethyl methyacrylate, 2-propanol, Mineral spirits. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Use personal protective equipment as required. Do not breathe dust/fumes/gas/mist/vapors/spray. Use only outdoors or in a well-ventilated area. Wear protective gloves/protective clothing/eye protection/face protection. Keep container tightly closed. Wash face, hands and any exposed skin thoroughly after handing. Contaminated work clothing should not be allowed out of the workplace. Keep away from heat/sparks/open flames/hot surfaces. – No smoking. Take precautionary measures against static discharge. Keep container tightly closed. Ground/bond container and receiving equipment. Use explosion-proof electricalventilating/lighting/equipment. Use non-sparking tools. Keep cool. Precautionary Statements - Response: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. Immediately call a Poison Center or doctor/physician. If on Skin (or hair): Remove/Take off immediately all contaminated clothing. If skin irritation or rash occurs: Get medical advice/attention. Wash contaminated clothing before reuse. If Inhaled: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a Poison Center or doctor/physician if you feel unwell. If Swallowed: Rinse mouth. Do not induce vomiting. In Case of Fire: Use CO2, dry chemical, or foam for extinction.,Danger: Flammable. This kit contains chemicals that may be harmful if misused. Read carefully cautions on back panel. Important read instructions carefully. Repair only at temperatures between 50 degrees F and 75 degrees F (10 degrees C and 24 degrees C). Causes serious eye irritation. May cause genetic defects. May cause respiratory irritation. May cause drowsiness or dizziness. Highly flammable liquid and vapor. Causes severe skin burns and eye damage. May cause an allergic skin reaction. May cause damage to organs through prolonged or repeated exposure. Keep out of the reach of children.Manufacturer
Illinois Tool Works Inc.
Solon, OH 44139
UPC
00686226213518