Loctite Power Grab Instant Grab Construction Adhesive Clear



Recommended for: Molding. Wall paneling. Chair rails. Foam board. Cork. Concrete base boards. Plaster. Ceramic. Drywall. Brick. Metal. Application: surfaces must be clean, dry and free of foreign materials. Adhesive and materials must be above 50 degrees F (10 degrees C) during application and curing. Required adhesive varies with surface texture/area and the weight of the item to be bonded. At least one surface must be porous. If the non-porous surface is glossy, sand to remove gloss and remove residue. Extremely heavy or distorted materials and glossy surfaces will need support until dry. Once the product is applied, you have 15 minutes to arrange or change the position of the substrate. Clean up: clean adhesive with soap and water before dry. General: Power Grab® dries in approximately 24 hours. Wipe excess from skin, clothing and other surfaces before the product hardens. Do not use Power Grab® in permanently damp or wet areas. Not suitable for bonding mirrors. Use product in accordance with the instructions. Protect from freezing. 1. 2. 10 sec. 3. 24h.



Loctite® Clear Power Grab® Construction Adhesive. New! Instant grab. All purpose. Dries clear for flawless results. Interior. The original instant grab. Water cleanup. Low odor. Wood, drywall, brick, tile & moldings. Interior construction adhesive. 3 fl oz (88 ml).

Other Description

A premium quality, instant grab adhesive which eliminates the need for nails and screws in many DIY and repair jobs. Henkel. ©Henkel Corp 2011. 1-800-624-7767 9:00 am – 4:00 pm E.S.T. Monday - Friday. www.loctiteproducts.com.


Caution! May cause eye and skin irritation. (Read carefully other cautions on back panel).
Caution: contains aliphatic hydrocarbon. Avoid eye and skin contact. Do not take internally. First aid: for eye contact flush with water for 15 minutes. For skin contact, wash thoroughly with soap and water. If swallowed, call physician or Poison Control Center. Keep out of reach of children.