conair Complete Care Protective Door Press Pad
1 pad
On This Page
Directions
Instructions for Use: 1. Set up your Conair garment steamer. 2. Attach the door press pad by placing the elastic straps over the top corners of your door and allowing the pad to hang down over your door with silver side facing you. 3. Place your garment on a hanger and hang from the center hook. 4. Pass the steam jets just above the wrinkled fabric. It may take a few passes to remove the wrinkles completely. 5. For heavier fabrics or severely wrinkled fabrics, take slower passes. 6. Always keep the unit in motion. Do not continuously hold steamer over an area to be treated, as damage may occur. Note: Some assembly required. This garment steaming door press pad is for use with all Conair garment steamers. Not meant for use with irons. To assemble your door press pad, insert metal bars into the top of the door pad from each side (black fabric), ensuring black caps are facing outside. Place silver hanger hook in the center section, with the hook below the bar facing toward you. Line up the grooves on the bar with the grooves on the hook and press together, making sure the bar is firmly attached.
Product Details
GDPP1 Creates a heat safe backing while steaming. Steamin simplified. Door pad accessory helps protect surfaces while steaming. Folds for easy storage. Quick & easy. Use with most fabrics. Professional results. Make your life a little smoother. Door pad accessory helps protect surfaces while steaming (For use with Conair handheld garment steamers). Garment steamer, garment and hanger not included. Due to continued product enhancements, product image may differ slightly from actual product purchased. www.conair.com For information on any Conair product, call 1-800-3-Conair or visit us on the web at www.conair.com. Made in Bangladesh.Nutrition Facts
Warnings
1. Use caution when using this pad with your garment steamer, as surface may get hot. Hot steam can cause burns! 2. When using over a door, do not allow the steam from your Conair garment steamer to reach outside of the press pad area as damage may occur. 3. Surfaces of a garment steamer are hot when in use. Do not let heated surfaces touch eyes or skin. 4. Do not hold hand in front of or behind steam. 5. Do not place the garment steamer's steam nozzle directly on any surface. 6. Burns could occur from touching hot parts, hot water, or steam from a garment steamer. Always position steamer with the head away from you and any other person when turning on. 7. When emitting steam, a garment steamer may cause bums if it is used too lose to the skin or eyes, or if it is use incorrectly. To reduce the risk of contact with hot water emitting from the steam vents, test appliance before use by holding it away from the body.Manufacturer
Conair Corporation
East Windsor, NJ 08520
UPC
00074108374455