Permatex Epoxy, Marine, H2 Hold
25 ml
On This Page
Directions
Directions: 1. For best results roughen surfaces using an abrasive or sandpaper. Surfaces must be clean, dry and free of grease and oil. 2. Remove plastic mixing paddle from center of black plunger. Turn nozzle end up and snap off storage cap (save cap). Pull plunger back 3mm (1/8 inches). Allow air bubbles to rise to top. 3. When ready, push plunger evenly to dispense equal amounts of hardener and resin onto a discardable surface (a piece of cardboard or the plastic package). Pull back plunger to stop flow. 4. Mix thoroughly with the paddle. 5. Apply to surfaces. Adhesive will start to set in 15 minutes and achieve fixture strength in 1 hour. Full cure in 24 hours. 6. Wipe nozzle clean. Replace cap for storage.
Product Details
Flexible & waterproof. Stick & cure underwater. Bonds: Fiberglass, Plastic, metal, wood, PVC & more. A two-part, super flexible, toughened, non-corrosive epoxy specially designed for wet or dry bonding on almost anything. Waterproof. Sticks and cures underwater. Resists shock and vibration. Sets in 15 minutes; Cure in 60 minutes; Temp: 51 degrees C to 82 degrees C ( -60 degrees F to 180 degrees F); Finish colour: Off-white; Waterproof; Permanent strength up to 4000 PSI. www.permatex.ca. Assembled in U.S.A. with U.S. and global materials.Nutrition Facts
Warnings
Caution: Irritant.,First Aid Treatment: Contains diglycidyl bisphenol A ether. If swallowed, call a Poison Control Centre or doctor immediately. Do not induce vomiting. If in eyes, rinse with water for 15 minutes. If on skin, rinse well with water.,Note: Will not bond to polyethylene or polypropylene plastics. May irritates eyes. May irritate skin. Do not mix with other chemicals. Do not get in eyes. Do not get on skin or clothing. Keep out of reach of children.Manufacturer
ITW Global Brands
Oakville, ON Canada
UPC
00068161841276