Capstone Combination 4 Ft Bike Lock with Mounting Bracket
1 lock
On This Page
Directions
To mount lock: 1. Using a Phillips screwdriver, remove the screw and nut from the mount. Clamp the mount around the seat post. Use the included spacers if necessary. Replace the screw and nut and secure the mount in position as shown. 2. Locate the capstone logo on either side of the lock. Slide the lock into the mount starting from the smaller side to the larger side of the lock until it clicks into place. Make sure the lock is secure before you ride the bike. 3. Press red button to release the lock from the mount. Set your own combination: 1. Open the lock by aligning the opening combination number to the guide point at the top of the lock and pull out the lock post. The lock combination is preset to 0000. 2. Turn the reset button clockwise to 90 degrees. 3. You are ready to turn the lock dials to set your secret combination, such as phone number, birthday, etc. 4. After you set your secret combination, turn the reset button counterclockwise at 90 degrees. 5. Verify your new combination before using your lock. Insert the lock post all the way into the locking port, but do not turn the dials. Pull out the lock post. Your lock is ready to use. The reset operation is now complete. Repeat steps 1-5 anytime you wish to change your secret combination.
Product Details
4 feet. 10 mm dia. Combination bike lock with mounting bracket. 3 Accu-safe security level. Time to ride. Limited lifetime warranty. Made in China. Location: Shanghai, China.Nutrition Facts
Warnings
Warning: Make sure lock does not interfere with the safe operation of the bicycle.Manufacturer
Kent International Inc.
155 US Highway 46 West Fairfield, NJ 07004
UPC
00016751672359