Compound W Nitro Freeze Skin Tag Remover
1 kit
On This Page
Directions
Instructions for use: Read information insert (inside box) carefully for all instructions and additional warnings before using Compound W NitroFreeze Skin Tag Remover. If the insert is missing, contact us at 1-800-443-4903 or at CompoundW.com for another copy before using this product. Read all instructions carefully before using Compound W Nitrofreeze Skin Tag Remover. Do not remove clear cap until step 4. Have ready a timer or clock that counts in seconds. If using a timer, set it to 20 seconds, so it is ready at step 5. Step 1: Preparation for first use only. Cap on. 1 full turn of white part until it clicks. With cap on, forcefully turn the white part of the pen one full turn (360 degrees turn) in the direction of the arrow until you hear a loud click. Once you perform this step for first use, you do not need to repeat it ever again. Step 2: Protect. Apply adhesive side to skin. Pop out the protective foam skin shield from sheet. Remove and discard the center and paper backing from the foam skin shield. Apply the adhesive side of the foam SkinShield around the skin tag to protect healthy skin. Use the slit in the skin shield to tighten the ring shape and snugly fit around the base of your skin tag. Step 3: Activate. 2 seconds of hissing. Place Compound W NitroFreeze Skin Tag Remover upright on a table, with the clear cap facing down. Hold the device with a steady grip. With the other hand, push the white pen downwards continuously until you hear exactly 2 seconds of hissing. Pushing for longer will waste useful doses. Pushing it for a shorter time reduces the freeze effect. Step 4: Remove cap. Take cap off. Remove the clear cap. The applicator tip should have a frosty appearance. Immediately proceed to Step 5. If there is no frosty appearance, replace the cap and repeat step 3. Step 5: Treat using time or clock. Apply 20 seconds. Start the timer or use a clock to accuratelytime your treatment. Apply the applicator tip continuously for 20 seconds. Do not apply for longer than 20 seconds. Note: It is normal to feel an aching, stinging sensation during treatment and for a short time afterwards. Step 6: Storage & next use. Wait 2 minutes. Wait at least two (2) minutes after use, then remove and dispose of the applicator tip from the pen and protective foam shield. Do not reuse applicator tip. Insert a new applicator tip into the pen and replace the cap. The pen is now ready for future use. Store in refrigerator and use remaining doses within 6 weeks of first use. Step 7: Monitor for 2 weeks. Skin tags may be removed in as few as 1 treatment. If the skin tag has not fallen off in 2 weeks, you may treat the skin tag again, up to a total of 3 treatment cycles. Follow steps 2 - 7 to retreat if needed. If the skin tag persists after 3 treatment cycles, stop using the product and talk to a doctor.
Product Details
Use: For the removal of skin tags for adults 22 years of age and older. 1 pen net 0.26 oz (7.5 g) | 4 replacements tips | 6 skinshields. New! Highest removal rate with 1 treatment. Fastest application time. Freezes in only 20 seconds! Includes SkinShields that help to protect surrounding tissue. 5 applications*. * The pen contains nitrous oxide liquid gas for 5 treatments when device is stored in refrigerator after first use. CompoundW.com. Questions? 1-800-443-4908 CompoundW.com. Made in Hungary.Nutrition Facts
Warnings
Tamper Evident: Do not use if seals on carton are broken or missing. Danger: Contents under pressure. Never pierce or burn, even after use - the device is under high pressure and cannot be opened. Protect from sunlight and do not expose to temperatures above 122 degrees F (50 degrees C) before first use. Store at room temperature away from heat. After first use, store in the refrigerator. Nitrous oxide is a non-toxic, nonflammable gas, but it will support combustion in case of fire. Keep away from flames or materials that burn easily. Do not smoke or use near open flame. Warnings: Keep out of reach of children. Avoid contact with eyes. Avoid inhaling and use only in well-ventilated areas. Do not eat. For external use only. Use only as directed. If you are not certain whether the skin condition is a skin tag, consult your doctor before using this product. Do not apply gas directly onto skin. Misuse of this product may result in burns and scarring of healthy tissue or blindness. Do not touch the surface of the cooled applicator tip. This can result in freezing healthy skin. Caution: Do not use if you are diabetic, have poor blood circulation, or have been diagnosed with blood conditions affected by extreme cold. Do not use if you are pregnant or breastfeeding. Always use the applicator tip when applying the product. Use one applicator tip for each skin tag. Do not reuse the applicator tip. Do not use Compound W NitroFreeze Skin Tag Remover to treat the same skin tag more than 3 times in total. Skin Tag Identification Guide: Skin tags must be located in one of these 5 locations. Only treat skin tags if they are located on the neck, chest, underarm, back, or groin. Skin tags must be similar in color to the surrounding skin. Color: Skin tone. Skin tags must be soft and flexible. You should be able to move them back and forth with your finger. They must also be raised above the skin and connected to the skin on a stalk or a stem-like piece of skin. Shape & Feel: Flexible. Skin tags must be 2 mm to 6 mm in size. If your skin tag does not have all 4 characteristics, do not use this product. See a doctor as you may have a more serious skin condition.Manufacturer
Medtech Products Inc.
Tarrytown, NY 10591
UPC
00075137000384