Fiskars Triple-Grind X1 Saw Blade
1 saw blade
On This Page
Directions
Saw Blade Replacement: 1. Remove the 5mm hex bolt. 2. Grip the back (non-cutting side) of the saw blade and gently slide the blade off the locking pin. Note: If you are replacing an x1 or x2 blade with an x3 blade, remove the old saw blade and the black plastic spacer from the assembly. Do not remove the 8mm diameter locking pin.
Product Details
x1 38cm 15 in. Optimized triple-grind tooth profile and blade curve for easier cutting with less effort. Compatible with all XtendControl Extension Poles. fiskars.com. Made in South Korea.Nutrition Facts
Warnings
Caution Cut Hazard: Sharp blade. Contact may result in injury. Always keep blades away from fingers and body. Handle with care. Use approved eye protection to protect from debris. Always ensure the Locking Bolt in the saw handle is tight before using. Do not extend inner silver poles beyond red mark. At minimum, always control pole with one hand while cutting. Do not stand directly under the branch you are cutting. Do not stand on a ladder when using pruner. Always store with blade down in included storage clip. Store in safe place out of reach of children.Manufacturer
Fiskars Brands, Inc.
7800 Discovery Drive Middleton, WI 53562
UPC
00046561813925