Fiskars Hook Bill X2 Saw Blade
1 saw blade
On This Page
Directions
Saw bade replacement: 1. Remove 5mm hex bolt. 2. Grip the rear (non-cutting side) of the saw blade and gently slide the blade off the locking pin. Note: If replacing an X1 or X2 blade with an X3 blade, remove both the old saw blade and black plastic insert from the assembly. The 8mm-diameter locking pin should not be removed.
Product Details
38 cm (15 in). Aggressive triple-grind tooth profile for fast action plus top hook for secure cutting. Compatible with all XtendControl Extension Poles. fiskars.com. Made in South Korea.Nutrition Facts
Warnings
Caution: Cut Hazard: Sharp blade. Contact may result in injury. Always keep blades away from fingers and body. Handle with care. Use approved eye protection to protect from debris. Always ensure the locking bolt in the saw handle is tight before using. Do not extend inner silver poles beyond red mark. At minimum, always control pole with one hand while cutting. Do not stand directly under the branch you are cutting. Do not stand on a ladder when using pruner. Always store with blade down in included storage clip. Store in safe place out of reach of children.Manufacturer
Fiskars Brands, Inc.
7800 Discovery Drive Middleton, WI 53562
UPC
00046561813932