1. Home
  2. OUTDRACC
  3. Shooter's Choice Lubricant Elite, FP-10 CLP

Shooter's Choice Lubricant Elite, FP-10 CLP

4 fl oz (118 ml)

On This Page

 

Directions

Directions: (1) Remove all ammunition from firearm. (2) Clean: Carbon lead and powder fouling by applying Shooter’s choice FP-100 Lubricant Elite liberally to bronze brush. Push through bore 10 times, wet patch bore, repeat this procedure until clean patch is achieved. Clean action with FP-10 using a nylon bristle brush, wipe clean with patch or cloth. (3) Lubricate: Apply FP-10 sparingly to all moving parts and wear surfaces. Work action several times to displace FP-10 into bearing surfaces. (4) Protect: Against rust and corrosion by applying FP-10 liberally to a soft clean and coat all metallic surfaces. Finish by using a clean dry patch or cloth to remove excess FP-10. Recommendations: To enhance rust and corrosion protection, apply a light coat of Shooter’s Choice rust prevent. Temperature range (-49 Degrees F to 500 Degrees F).

 

Product Details

Trusted since 1983. Reduces friction & wear. Protects against rust & corrosion. Removes carbon & powder fouling. Fp-10 Lubricant Elite: Fp-10 lubricates, cleans and protects. 100% satisfaction guarantee. shooters-choice.com. Made in USA.

Nutrition Facts

Warnings

If Swallowed: Do not induce vomiting. Call poison center or doctor if you feel unwell. If in eyes: Rinse cautiously with water for several minutes. If eye or skin irritation persists: get medical attention.,Note: Fp-10 contains no solid lubricants (PTFE) To build up or change tolerances. Fp-10 will not harm most wood or plastic surfaces. Fp-10 will not remove copper fouling. Warning: contains petroleum distillates. Causes serious eye irritation. Keep out of reach of children

Manufacturer

Shooter's Choice
6987 Laura Street Lyons Falls, NY 13368

UPC

00027784000101