K Seal Head Gasket Repair, Permanent, Ultimate
16 fl oz (472 ml)
On This Page
Directions
Simple to use - shake, pour & go. Instructions: 1. Shake bottle well and add via radiator or top hose where possible, especially with over-pressur- izing systems. When added via overflow tank repair may take longer. 2. Start the engine and run up to normal operat- ing temperature to allow K-Seal Ultimate to circulate fully around the cooling system. Leave heater controls at cold Leak normally stops within 3-5 minutes but may require more than one heat/cool cycle. 3. K-Seal Ultimate will make a seal where there is a pressure differential in the cooling system at the failure point. Take extra care when opening the cooling system as it may be under pressure. If in doubt consult a qualified mechanic. Visit www.kseal.com for detailed instructions. Important: K-Seal Ultimate mixes with all types of coolant/antifreeze. There is no need to drain or flush the system prior to adding the product. Plus, unlike many other products, K-Seal Ultimate works equally well if there is only water in the cooling system. K-Seal Ultimate is suitable for use with all water cooled engines. 1 bottle treat all cars and SUVs/light trucks. For larger cooling systems in heavy duty vehicles use 2 bottles.
Product Details
Permanent. Also seals cracked heads and cracked/porous blocks. Powerful trade trusted formula to repair coolant leaks. Can be added to a hot or cold engine. Can be added to the overflow tank. Anti-rust protection. Independently tested to meet ASTM D3147. Seals hole diameters up to 0.025 inches and cracks widths up to 0.010 inches. Proven will not block even the narrowest waterways in the cooling system. Tech tip over pressurizing cooling system symptom: Bubbles in overflow tank/exhaust gas odour from tank. Action: Add K-Seal directly to the radiator or via radiator top hose to bypass the overflow/header tank. Or drain some coolant, mix with the K-Seal and add it back to the cooling system. This helps prevent K-Seal being trapped in the overflow tank so it can effectively reach the failure point. Extra Tip: Disable the spark plug and/or injector in the offending cylinder to reduce the pressure into the cooling system, and run the engine up to temperature more than once. Avoid loading the engine so just leave it idling while K-Seal gets to work. Not suitable for leaks in hoses, coolant to oil or oil to coolant leaks. Only add to cooling system. Don't just seal it, K-Seal it! Money back guarantee. Money Back Guarantee: If k-seal ultimate does no fix your head gasket failure, cracked block or porous block you can claim a full refund. Visit www.kseal.com for full details of our money back guarantee. www.kseal.com. info(at)kseal.com. Visit www.kseal.com for detailed usage instructions, tech tips and advice. Solv-Tec Inc. Medford, NJ | Toll Free: 888-254-0150 info(at)kseal.com | www.kseal.com. Made in USA.Nutrition Facts
Ingredients
Contains: Zinc Gluconate, 4-Nonylphenol, Branched, Ethoxylated, Borax and Copper.Warnings
Warning: This product can expose you to Ceramic Fibers, which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.,Warning: Eye irritant. Warning: Causes serious eye irritation. May damage fertility. May damage the unborn child. Toxic to aquatic life. Harmful to aquatic life with long lasting effects. Wash contaminated skin thoroughly after handling. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: get medical advice/attention. Keep out of the reach of children.Manufacturer
Solv Tec
Medford, NJ
UPC
00855959003080