Flex Seal Sealant Coating, Liquid Rubber, White
14 oz (396 g)
On This Page
Directions
Directions: so easy to use! Read entire can. Wear face and eye protection, protective gloves and clothing; make sure the area is clean, dry and free of grease, oil & dirt; shake well: spray 8 inches to 12 inches from surface using an even sweeping motion. Apply several coats until all cracks and holes have been filled. Allow 24 to 48 hours to dry before applying another coat. Fully cures in 48 hours. Hint: make sure flex seal has filled all cracks and holes and is fully cured before testing product. If light passes through apply additional coats. Use only in a well ventilated area. Prevent. Vapor buildup by opening doors and windows. Ensure fresh air entry during application and drying. Do not use near heat, sparks, pilot lights or others or other sources of ignition. Do not smoke. When covering large areas indoors, eliminate ignition sources far from the point of use because vapors are heavier than air and may travel significant distances. When applying to large areas indoors, do not exceed use of 1/2 of a can before allowing one hour for the coating to dry and vapours to dissipate before using again. Works best at can temperatures above 60 degrees F. Shake can throughout application. Shake throughout application. Note: After each use, invert can and apply a short burst to clear nozzle. Not intended for use by Professional Roofers. This product has no tested for use in potable water systems. May not be compatible with all plastics and rubbers.
Product Details
As seen on TV. Liquid rubber in a can! Stop leaks; seals & protects; covers easily. Excellent for: Roof leaks; gutters; skylights; windowsills; flashings; duct work; foundations; awnings; chimneys; downspouts; vent pipes; A/C drip pans; RV’s & campers; trailers and so much more! Coat, seal & protect! Stops leaks fast! CARB Coating Category: Flexible coating Max 1.6 Mir. Flex Seal is an easy to use rubberized coating that sprays out as a liquid, seeps into cracks and holes and dries to a watertight, flexible coating. Flex Seal seals out water, air and moisture and helps prevent rust and corrosion. Once dry, Flex Seal can be painted over. Flex Seal is the easy way to coat, seal, protect and! Stop leaks fast! www.flexsealproducts.com. 24 Hour medical emergency: 1-866-836-8855. To reorder please visit www.flexsealproducts.com. Pleae recycle when empty. Made in Canada.Nutrition Facts
Warnings
Warning: This product can expose you to chemicals including titanium dioxide, which is known to the State of California to cause cancer, and toluene, which is known to the State of California to cause birth defects or other reproductive harm. For more info go to www.P65Warnings.ca.gov.,First Aid: If Eye Contact: Flush with large amounts of cool running water for at least 15 minutes while holding upper and lower lids open. Remove contact lenses, if present and easy to do. If irritation persists get medical attention immediately. If Skin Contact: Wash with soap and water. If irritation persists seek medical attention. Inhalation: Remove to fresh air. Seek medical attention immediately. If breathing stops give artificial respiration. If Ingested: Do not induce vomiting. Call physician immediately.,Danger: extremely flammable. Harmful or fatal if swallowed. Vapor harmful. May cause eye, skin, and respiratory tract irritation. Contents under pressure. See other cautions on back panel. Keep out of reach of children. DANGER: Contains (CAS No): Toluene (108-88-3), Naptha (Petroleum), Hydrotreated Heavy (64742-48-9), Light aliphatic solvent naphtha (petroleum) (64742-89-8), Titanium dioxide (13463-67-7), Propylene Carbonate (108-32-7), and Liquefied Petroleum Gas (68476-86-8). Prevent vapor buildup by opening doors and windows. Ensure fresh air entry during application and drying. Do not use near heat, sparks, pilot lights or other sources of ignition. Do not smoke. When covering large areas indoors eliminate ignition sources far from the point of use because vapors are heavier than air and may travel significant distances. Intentional misuse by concentrating and inhaling the product can be harmful or fatal. Avoid contact with eyes or prolonged contact with skin. Do not puncture or incinerate Container. Do not expose to heat or store at temperatures above 120 degrees F.Manufacturer
Swift Response
Weston, FL 33331
UPC
00855647003613