Command Strips 6 ea BLISTER PACK


 

Directions

Apply: 1. Clean surface with rubbing alcohol. Do not use household cleaners. 2. Remove red liner. Press adhesive to hook. 3. Remove black liner. Press to wall for 10 seconds. 4. To ensure adhesive hold, slide hook up and off. 5. Press base firmly for 30 seconds. 6. Slide hook back on. wait 1 hour before use. Remove: 1. Slide hook up and off. 2. Gently hold mounting base in place. 3. Never pull the strip towards you! Always pull straight down. 4. Stretch the strip slowly against the wall at least 15 inches to release. Failure to follow instructions carefully may cause damage. Save instructions or visit command.com.

 

Description

Holds 5 lb (2.2 kg). Damage-free hanging. Holds strongly - removes cleanly.

Other Description

Save instructions or visit command.com. Visit command.com for the strip holding power for your product.

Warnings

Caution: Do not hang over beds or on wallpaper. Do not hang valuable or irreplaceable items or framed pictures. Use indoors 50 degrees - 105 degrees F.

Distributor

3M
800-934-7355

UPC

00051131851269