Krylon Clear Polyurethane, Specialty
11 oz (311 g)
On This Page
Directions
Ideal Conditions: Use outdoors or in a well ventilated area. For best results, use when air & surface temperatures are 55 degrees F (12 degrees C) - 75 degrees F (24 degrees C) & humidity is below 60%. Note: Applying outside of this range may impact finish. Painting: Shakle until ball inside begins to rattle, then shake for an additional 2 minutes. Hold can 10 cm - 12 cm from surface, spray in sweeping motion, from side-to-side with slight overlap. Apply multiple thin coats to avoid runs & drips. Once surface is glossy wet, allow 10 touch in 15 minutes or less. Handle after 4 hours. Recoating: Within 2 hours or after 72. After Use: Clean valve holding can upside down and spraying until only clear gas comes out. Id spray button becomes clogged, wear eye protection, wipe off the button opening with lacquer thinner - do not stick pin in spray button opening. Clean overspray with lacquer thinner, following solvent's manufacturer's instructions. Wash hands after using.
Product Details
No runs, no drips, no errors. Water & wear protection/ Brush-stroke free/ Interior/exterior. For wood, metal & more. Dries in 15 minutes. Ez touch 360 degrees dial. Adjustable fan spray. Cap indicates color and sheen. Provides protection from water, scratches & stains; provides a smooth brush-stroke-free finish on natural, stained or painted wood. Materials: Wood, metal, wicker, glass, plaster, ceramic, paper mache. Conforms to the health requirements of ASTM D-4236. www.krylon.com. Please recycle when empty. Recycling facilities for this product may not exist in your area. Made in the USA with global materials.Nutrition Facts
Warnings
First aid: in case of eye contact, flush thoroughly with large amounts of water for 15 minutes and get medical attention. For skin contact, wash thoroughly with soap and water in case of respiratory difficulty, provide fresh air and call physician. Delayed effects from long term over exposure. Contains solvents which can cause permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents can be harmful or fatal.,Warning: This product contains chemicals known to the state of California to cause cancer and birth defects or other reproductive harm. Do not take internally. Keep out of reach of children. Conforms to ASTM D-4236. Contact a physician for more health information. Danger: Rags, steel wool, other waste soaked with this product, and sanding residue may spontaneously catch fire if improperly discarded. Immediately place rags, steel wool, other waste soaked with this product, and sanding residue in a sealed, water-filled, metal container. Dispose of in accordance to local fire regulations.Manufacturer
Krylon Products Group
Cleveland, OH 44115
UPC
00724504073284