Command Hook, Matte Black, Medium
1 package
On This Page
Directions
Prep: Do not hang frames on hooks. Wait 7 days after painting before use. Wipe wall with rubbing alcohol. Do not use household cleaners or water. Apply: 1.Remove red liner. Press adhesive to hook. 2. Remove black liner. Press to wall for 10 seconds. Complete steps 3-5. Critical steps to ensure hold. 3. Temporarily remove hook from wall to reinforce strip. Slide hook up and off base. 4. Press base firmly for 30 seconds. 5. Slide hook back on. Wait 1 hour for adhesive to build. Remove: 1. Slide hook up and off. 2. Gently hold mounting base in place. 3. Never pull away from wall. Stretch the strip slowly against the wall at least 12 inches to release.
Product Details
Holds: 3 lb (1,3 kg). Damage-free hanging. Holds strongly. Removes cleanly. Medium matte black hook. Decorative. Hook can be reused with Command Medium Refill Strips. Limited Warranty/ Limitation of Liability (USA): Product will be free from manufacturing defects. If defective, 3M will replace or refund at 3M’s option. 3M will not be liable for any loss or damage, whether direct, indirect, incidental or consequential. command.com/howtouse. 1-800-934-7355. Hooks made in Mexico. Strips made in USA.Nutrition Facts
Warnings
Caution: Failure to follow instructions may result in damage or injury. Do not hang valuable items. Do not hang over beds, or on wallpaper. Use indoors: 50-105 degrees F.Manufacturer
3M
St. Paul, MN 55144
UPC
00638060081051