GE Tub & Tile Sealant, White
10.1 fl oz (299 ml)
On This Page
Directions
Tip: Most caulks that are water clean-up (e.g. most acrylic, siliconized acrylic or acrylic plus silicone) are not permanently waterproof. Instructions: 1. Remove dirt, grease, moisture, soap residue & old caulk from area to be sealed. Use backer rod for gaps larger than 1/2 inch x 1/2 inch. 2. Cut nozzle to obtain desired bead size. 3. Pierce inner foil seal. 4. Using caulk gun, apply sealant into gap. Smooth the sealant into gap. 5. Wipe hands & tools thoroughly before washing. (6) Allow 12 hours before exposing sealant to water. Not for underwater/aquarium use or where FDA compliance is necessary.
Product Details
100% waterproof, 100% silicone. Silicone 1. Shower, sink, glass, countertop. Resists mold: shrink proof, crack proof. Permanently waterproof. Pro’s choice for interior wet projects. Freeze & sun-proof, wet & dry, non paintable. Indoor, outdoor. GE silicone 1 tub & tile 100% silicone is a permanently waterproof sealant that resists mold and never cracks, shrinks, breaks down or washes away. Excellent for use in the kitchen, bathroom and plumbing applications. GE 100% silicone is 100% waterproof. Silicone is a permanently waterproof and flexible sealant. It will not shrink, crack or crumble over time. Acrylic caulk can shrink and crack, leaving gaps that can lead to water damage, mold growth and higher energy usage. Resists hold: Cured sealant is resistant to stain-causing mold and mildew. Regular cleaning of the cured sealant is required however, as soap or other residue can cause secondary mold & mildew growth. Specifications: Meets fed spec TT-S-00230C; TT-S-001543A/ASTM C-920, Type-S, NS, Class 25, use NT, G, A & O test requirements. Adheres to: Most ceramic tile, laminate, porcelain, glass, metal, plastic, granite & wood. Typical uses: Showers, tubs, sinks, tile, countertops & fixtures. Typical product info: Application temp: (32 degrees F to 120 degrees F); Service temp: (-60 degrees F to 400 degrees F); Tack-free: (30 minutes); Water exposure: (12 hours); Full cure: (24 hours); Paint over time: N/A (Non-paintable); Clean-up: (Mineral spirits); Coverage (3/16 inches bead): 51 lin. Ft); VOC (excluding water & exempt compounds): (36 g/l); Carb chem curing (n-a) VOC: (less than 3.0 wt%). Limited lifetime guarantee: Manufacturer warrants that this product, when handled and used as directed, will meet the above specifications far as long as you own your home. If not satisfied, return proof of purchase for refund. This is the sole and exclusive remedy and manufacturer shall not be label for any damages in excess of purchase price. This warranty is in lieu of all other warranties, express or implied, including any warranty of merchantability or fitness. www.gesealants.com. For questions or information: Call toll free (856) 275-4372 or visit www.gesealants.com. Made in USA.Nutrition Facts
Warnings
See limitations on back: Warning! Uncured product causes irritation. Read back panel before using. Warning: Uncured product may cause skin, eye, & respiratory tract irritation. May cause headache, dizziness, nausea. Acetic acid released during cure. Avoid breathing vapors. Use in well-ventilated area. Wear gloves and eye protection and remove contact lenses before using; thoroughly clean hands after use. Eye contact: Flush eyes with water; get medical attention if irritation persists. Contains methyltriocetoxysilane, acetic acid and petroleum distillates. Harmful if swallowed. Consult safety data sheet for further information. For consumer and professional contractor use. Keep out of reach of children.Manufacturer
Momentive Performance Materials
Huntersville, NC 28078
UPC
00077027007121