Diamond Crystal Winter Melt
Weight: 25 lb (11.3 kg)
Remove slush and as much loose snow as possible before ice melter application. Spread Winter Melt evenly across surface area. Apply 1/2 to 1 cup per square yard, depending on ice thickness and air temperature, as needed. Reapply as necessary. When ice and snow soften, remove slush and any excess ice melter from pavement for good concrete maintenance. Storage Information: Salt crystals contains sodium chloride, which may harden and cake if exposed to moisture. Close and reseal container tightly to keep product dry, or place in a moisture-proof container. Store in a dry place. Always store ice melters out of reach of children and pets.
The ice melt standard. Melts ice down to: 5 degrees F (-15 degrees C). High capacity ice melter. Blend of large and small melting crystals for extended melting action. Helps provide instant traction on snow and ice. Natural mineral. Which Diamond Crystal products is best for your needs? 3 Star Diamond Rated Winter Melt: outside temperatures 5 degrees F/ -15 degrees C; prepares sidewalks for safe travel. 4 Diamond Rated Jiffy Melt: Outside temperatures -5 degrees/-21 degrees C; faster melting results, prepares sidewalks for safe travel. 5 Diamond Rated Flash Melt: Outside temperatures -25 degrees F/ -31 degrees C, faster melting results, prepared sidewalks for safe travel, generated heat upon contact with snow and ice. Rated for effectiveness when compared to Diamond Crystal Ice Melter products, when used as directed. Product of USA.
100% Salt (Sodium Chloride) CAS No. 7647-14-5.
Use as directed. Diamond Crystal Winter Melt is not intended for human or animal consumption. If ingested, drink water. If discomfort occurs or persists, contact your doctor or veterinarian. Winter Melt Ice melter may be used to remove snow and ice from concrete sidewalks, parking lots, and asphalt surfaces. However, all ice-melting agents work by reducing the freezing point of water. This may result in frequent freeze-thaw cycling of the melted snow and ice, which can cause surface scaling of concrete. As such, use only on properly placed, cured and sealed, air-entrained concrete. To lessen the possibility of freeze-thaw cycling and potential damage, promptly remove slush as it is formed. Do not use on porous or improperly cured concrete, concrete less than one year old, precast concrete items, masonry, mortar, wood or other porous materials. As with any ice-melting agent, particular care should be used when grass and vegetation are adjacent to the deicing surface as excess application may cause damage. Consumer uses this product at his/her own risk.
Minneapolis, MN 55440 800-428-4244