Redken Up to 7
Up to 7 with Conditioning Agent
Weight: 2 lb (907 g)
Wear suitable gloves when mixing and applying. Protect clothing. A strand test should be done to determine proper processing time. Do not use if strand test shows breakage. Mix product in a well-ventilated area. In a non-metallic bowl, combine the recommended amount of Up to 7 De-dusted Lightener with the appropriate amount and volume of Pro-oxide and mix thoroughly. Use only with the recommended developers (Pro-oxide 10, 20, 30 or 40-volume) as indicated below. Read below for mixing ratios for desired applications. Off-Scalp Applications Only: Up to 7 - 1 Scoop (11g); Pro-Oxide Volume/Amount - 10, 20, 30, 40 Volume/30 ml (1 oz); Processing Time - Process at room temperature until desired lightness is achieved for up to a maximum of 50 minutes. Do not use heat. On/Off-Scalp Applications: Up to 7 - 1 Scoop (11g); Pro-Oxide Volume/Amount - 10, 20 Volume/30 ml (1 oz); Processing Time - Process at room temperature until desired lightness is achieved for up to a maximum of 50 minutes. Do not use heat. Important! Keep off scalp and away from client's face, eyes and neck to avoid burns, irritation or other injury. Close tub after usage. Store in a cool, dry place. For On-Scalp Techniques, do not mix with over 20-volume developer; irritation or blistering could occur. Application and Rinsing: Wear suitable gloves. Do not let product run onto scalp. Do not use metallic tools (clips, comb, etc.). Rinse hair well after development time.
De-Dusted Lightener for Weave, Slice, Balayage Techniques and On-Scalp Applications. Lifts hair up to 7 levels. Smooth, cream formula for optimal results. For natural or color-treated hair. This 2-component system includes Up to 7 De-dusted Lightener and Pro-oxide 10, 20, 30 and 40-volume. Up to 7: Lifts hair up to 7 levels. Mixes in a 1:1 ratio to a rich, cream consistency for even results from roots to end. Smooth, cream formula with conditioning agent for optimal results. Stays moist with no puffing and no foil slipping. No added fragrance. For natural or color-treated hair. (Do not use over metallic dyes (color restorers), compound hennas, hennas or semi-permanent haircolor. Wait until hair treated with these products has grown out or semi-permanent haircolor has washed away. Hair breakage or discoloration could result.) Made in Canada.
Potassium Persulfate, Sodium Silicate, Sodium Persulfate, Corn Starch/Zea Mays, Sodium Lauryl Sulfate, Ammonium Chloride, Xanthan Gum, PPG-2-Ceteareth-9, Sodium Metasilicate, Sodium Stearate, Amorphous Silica, Mica, Ammonium Sulfate, Acrylates/C10-30 Alkyl Acrylate Crosspolymer, Poloxamer 182, Titanium Dioxide/CI 77891, Polyquaternium-22, EDTA, Sodium Sulfate (D5572/3).
Important: This product can cause an allergic reaction for your or your client. Follow the precautions carefully. Please Read This Important Information: Keep out of reach of children. Avoid contact with eyes and skin. Do not use other developers or a higher volume than recommended. Do not use on children. Wear appropriate gloves. Do not use on eyebrows or eyelashes; to do so my cause blindness. Client should remove contact lenses before application of the mixture. Do not get mixture into eyes; to do so may cause blindness. If mixture does get into eyes, rinse out immediately with lukewarm water. If irritation persists, get medical attention. If your client needs to wear contact lenses during application and mixture gets into eyes, remove lenses first, then flush immediately with lukewarm water. If irritation persists, get medical attention. Avoid contact with skin. If contact occurs, rinse immediately with lukewarm water and get medical attention if irritation (including redness, burning, irritation, pain or itching) occurs. If irritation occurs, stop further chemical processing. Do not use if scalp is irritated, red or broken. Client should not shampoo his or her hair for two days prior to highlighting; to do so could over-stimulate scalp and cause sensitivity. Do not brush hair hard before using. Brush lightly only to remove hair spray residue. Wait at least two weeks before using this product on a new perm. Do not use if your client's hair has been processed with a hair straightener or relaxer. Do not use over metallic dyes (color restorers), compound hennas, hennas or semi-permanent haircolor. Wait until hair treated with these products has grown out or semi-permanent haircolor has washed away. Hair breakage or discoloration could result. Do not use on brittle or damaged hair. Do not apply any bleach more than one in 24 hours. Use only plastic or glass utensils, clips or combs; never metal. Do not save leftover product, tub or utensils. Do not re-use. This product contains persulfates and other ingredients, which may cause serious irritant, respiratory and/or allergic reactions. Do not inhale or ingest. Prepare and use in well-ventilated area. If affected by inhalation, move to fresh air. If symptoms persist, get medical attention. If swallowed, call a physician, hospital emergency room, and or poison control center immediately. Induce vomiting only if recommended by medical personnel. Get prompt medical attention. Use only as directed. This package is designed and intended for use by professionals only. Instructions are for professionals, not consumers.
ManufacturerRedken 5th Avenue NYC LLC
New York, NY 10017