Olympic Interior Wood Stain, Oil Based, Early American, 41552
Interior Wood Stain, Oil Based, Early American, 41552
Weight: one quart (946 ml)
Simple and easy to apply. The key to an excellent final appearance is good surface preparation. Proper surface preparation is essential for the Olympic limited warranty to apply. Preparation: Bare Wood: Sand with the grain of the wood. Refinishing Old Wood: Remove all old finishes using furniture refinisher from the Olympic Interior Wood Finishing System. Final surface preparation: Wood must be free of dust, dirt, grease or oils. Use a tack cloth or vacuum cleaner to remove any dust or dirt from the wood. Surfaces must be dry before staining. Application: For even color acceptance on soft woods, such as pine, fir, alder, and spruce, use Olympic Wood Conditioner. Wipe the conditioner onto the wood and allow to penetrate for 5 minutes, then wipe off the excess. Stir stain before use. Apply with a clean cloth, brush, sponge, pad, roller, or by spray equipment. No thinning is needed for any application. Allow to penetrate for 5 to 15 minutes. Wipe off the excess stain with a clean cloth. The intensity of the color is controlled by the penetration time. To further increase color intensity, allow the stain to dry for 5 hours, then apply a second coat. Dry time: Dry time varies with temperature, humidity, and wood type. Allow at least 5 hours before top coating. Cleanup: Clean up with mineral spirits or paint thinner. Danger-rags, steel wool or waste soaked with this product may spontaneously catch fire if improperly discarded. Immediately after use, place rags, steel wool or waste in a sealed water-filled metal container. Coverage: Olympic Interior Wood Stains will cover approximately 125 sq ft (11.6 m2) per quart (946 ml). Coverage will vary with wood type and preparation.
Absorption control formula. Ensures consistent color. Penetrates and seals. Color rich. Low odor. Interior wood stain penetrates into the wood and seals the pores to improve durability of the wood while enhancing its natural color and grain contrast. It is easy to apply with a clean cloth, brush, sponge, pad, roller, or by spray equipment. These stains have been formulated for use on soft and hard woods and work well on furniture, cabinets, paneling, trim, doors and floors. It is designed for use on new and stripped wood.
Naphtha (64742-48-9), Soybean Oil (8001-22-7), Alkyd Resin (Cert. Ltr.), Lecithin (8002-43-5), Naphtha (8052-41-3).
Danger! Harmful or fatal is swallowed. Skin and eye irritant. Vapor harmful. Irritates eyes, nose and throat. Combustible. Precautions and First Aid: Keep away from heat, sparks, flames, and other sources of ignition. Do not smoke. Avoid contact with skin and eyes. Provide fresh air ventilation during and after application and drying. If you experience eye watering, headaches or dizziness, increase fresh air or wear respiratory protection (NIOSH/MSHA TC 23 C or equivalent) or leave the area. Repeated exposure to high vapor concentrations can be harmful or fatal. Use with adequate ventilation. Danger-Rags, steel wool or waste soaked with Olympic Interior Wood Stain may spontaneously catch fire if improperly discarded. Immediate after each use, place rags, steel wool, or waste in a sealed water-filled metal container. First Aid: If swallowed, do not induce vomiting. Call Physician immediately. In case of skin contact, flush immediately with plenty of water for at least 15 minutes followed by washing with soap and water. In case of eye contact, remove contact lenses and flush eyes immediately with a gentle steam of lukewarm water for at least 15 minutes. If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention. Close container after each use. Keep out of the reach of children. For emergency medical or spill control information, call (304) 843-1300. For Product Safety Information, call (412) 492-5555. This product is intended for consumer use. If it is used in the workplace, a Material Safety Data Sheet is available from your retailer or by calling (412) 492-5555.
ManufacturerPPG Architectural Finishes, Inc.
One PPG Place Pittsburgh, PA 15272