3M Command Hook with Silver Finish
Hook with Silver Finish Plus 2 Small Strips
Weight: 1 hook
Directions
To Mount Hooks: 1. Clean Surface: Clean surface with isopropyl rubbing alcohol, wipe lightly, let dry. Do not use household cleaners. 2. Apply Strip: Separate red liner. Apply strip. Press firmly. 3. Press Firmly: Remove black liner. Mount hook and press entire hook firmly for 30 seconds. 4. Wait: Wait 1 hour. Save instructions for future removal. To Remove Hooks: 1. Slide Cover: Slide hook cover over to reveal base and removal tab. To avoid marking the wall, gently slide hook cover over without contacting the wall. Marks can be removed with isopropyl rubbing alcohol. 2. Grab Tab: To prevent base from snapping your fingers, hold base as shown. Do not press base against wall. Never pull the strip out at an angle. Strip could break or damage the surface. 3. Slide Tab: Slowly slide the tab straight down against the wall, stretching the strip at least 15 inches until base releases from the wall. Apply to surfaces above 50 degrees F (10 degrees C). Adhesion could lose adhesion above 105 degrees F (40 degrees C).
Product Details
Holds on strongly. No surface damage. Holds 1 lb. Ultra Modern Small Metal Hook and Command Adhesive Strips innovation meets design. Stretch release technology offers damage free removal. Hook is reusable with an extra strip included. Elegant, simple design complements any room. Limited Warranty. Made in USA.
Warnings
Follow instructions carefully! Save instructions for clean removal in the future. Not recommended for wallpaper. Do not use for antiques, heirlooms, or other valuable or irreplaceable items. Do not hang items over beds. Use only one hook per object hung.
Manufacturer
3M Construction and Home Improvement Markets3M Center St. Paul, MN 55144-1000 800-934-7355
Copyright 2006
UPC
051131939561