Rite Aid Tugaboos Bottle Liners
Bottle Liners, 8 fl oz Ready-Formed
Weight: 100 liners
Directions
1. Open box and remove one liner from stack. 2. Place a Ready-Formed Bottle Liner into holder. (Fits most disposable bottle holders.) 3. Fill liner with liquid to desired level using the easy-to-read ounce markings. 4. Press nipple into retainer ring and push the bottom of the nipple firmly against the underside of the retainer ring to ensure proper seal. 5. Screw retainer ring with nipple onto holder and tighten securely. 6. To remove air, carefully squeeze the liner until a small amount of liquid comes out of the nipple. Note: Do not squeeze air from liner when retainer ring is loose. Avoid contact of sharp objects with liner. 7. Discard liner after use. To Warm Liquids: Place holder and liner under hot running tap water. To warm liquid before placing in liner, heat liquid in separate container and allow to cool for at least 15 minutes before pouring into liner. Be sure to dissolve powdered formula thoroughly in a separate container. Before feeding, test liquid to ensure it is at baby's drinking temperature. Warning: Do not heat in microwave oven. Do not boil or sterilize any liquid in the liner. Do not fill liners with boiling liquid. Do not place liner or holder in pan while heating water. Do not shake holder while formula is hot. If you do not follow these instructions, liners may burst and result in burns or scalding.
Product Details
BPA free. Collapsible. Disposable. Pre-sterilized. Flexible. Compare to Playtex Drop-Ins (Tugaboos Bottle Liners are not manufactured or distributed by Playtex Products, Inc., owner of the registered trademarks Playtex and Drop-Ins). Tugaboos Ready-Formed Bottle Liners offer unsurpassed ease in feeding. They are simply placed into any disposable bottle holder and are ready to be filled. Tugaboos Ready-Formed Bottle Liners are specially molded without seams to ensure the liner collapses properly while feeding and reduces the chance of leakage. They are pre-sterilized and disposable so you get a clean liner for every feeding. Compare & Save. Tugaboos Compared to Playtex Drop-Ins: Pre-Sterilized: Tugaboos, Playtex Drop-Ins. Fits Most Holders: Tugaboos, Playtex Drop-Ins. Collapsible: Tugaboos, Playtex Drop-Ins. Economical (As compared to 50 count Playtex Drop-Ins): Tugaboos. If you're not satisfied, we'll happily refund your money. Manufactured in Guangdong Province, China.
Warnings
Before allowing filled bottle to be near baby, test liquid to ensure it is at baby's drinking temperature. To avoid injury, do not allow baby to walk with holder. Do not leave bottle with your baby unsupervised or for an extended period of time. Prolonged contact with liquids may cause severe tooth decay. Ask your doctor or dentist.
Manufacturer
Rite Aid30 Hunter Lane Camp Hill, PA 17011 888-400-6050
UPC
011822317344